Self-healing Low Voltage Filter Capacitor AKMJ used in filter device

• Type: Power capacitor
• Voltage range: 100V to 1000V
• Frequency: 50Hz or 60Hz
• Cabinet Material: Galvanized steel
• Installation Anchor: Fixed Installation hole,
• Transport Package: Non-Fumigation Wooden Case
• Model NO.: AKMJ
• Specification: Shunt Capacitor Filter Capaciotr
• Trademark: XD
• Origin: China
• HS Code: 8532300000
• Production Capacity: 500000

Product Description

General Introduction

Voltage Scope	100-1000V
Frequency	50 or 60 Hz
Connection Method	D, Y, YN, Three
Wiring Terminal	According to capacition power: M6, M8, M10
Earthing Terminal	Via M6 bolt earthing at the fixed place of shell
Cabinet Material	Galvanized steel
Installation Anchor	Fixed installation hole, see the detailed drawings
Installation Condition	Indoor
Altitude	2000m
Temperature Difference	-25/C
The Distance Between Capacitor and Wall	≥50mm
Capacitor Distance	≥50mm
Tangent of Loss Angle	tan  ∂≤0.0010 (20ºC  50Hz)
Capacitance Deviation	-5%~ +10%
Voltage Test	AC voltage test between terminals:2. 15Un for 2s,            AC voltage test between terminals and housing:2 Un+2kV or 3kV, getting the higher value, lasts 10s
Overload Capacity	Overvoltage allowed: 1.10Un, no more than 8h every 24 hour, system voltage adjustment and fluctuation         Overcurrent allowed: 1.30In, continuous operation.  Maximum output power:1. 35Qn
Discharge Capacity	Built-in fixed connection discharge resistor to ensure safe discharge of capacitor, discharge to 75V lower after 3 minutes of power off. Note: The discharge device cannot replace shorting the capacitor terminals and grounding before touching the capacitor. If special circumstances require shorter discharge time and lower residual voltage, the purchaser should inform us.

Product Description

Self-healing low voltage filter capacitor is mainly used in filter device, used in series with reactor, in order to filter out the corresponding frequency harmonics in the system.
 

 

Three Phase 400V 50Hz Indoor Installation
Model	Cap. (Kvar)	Im (A)	C (uF)	Weight (KG)	H (mm)
BKMJ0.4-20-3	20	28.9	398	4.2	178
BKMJ0.4-25-3	25	36.1	497	5	242
BKMJ0.4-30-3	30	43.3	597	5	242
BKMJ0.4-40-3	40	57.7	796	6.5	306
BKMJ0.4-50-3	50	72.2	995	7.8	370
BKMJ0.4-60-3	60	88.6	1194	9	435

 

Three Phase 460V 50Hz Indoor Installation
Model	Cap. (Kvar)	Im (A)	C (uF)	Weight (KG)	H (mm)
BKMJ0.46-20-3	20	25.1	301	4.2	178
BKMJ0.46-25-3	25	31.4	376	5	242
BKMJ0.46-30-3	30	37.7	451	5	242
BKMJ0.46-40-3	40	50.2	602	6.5	306
BKMJ0.46-50-3	50	62.8	752	7.8	370
BKMJ0.46-60-3	60	75.3	903	9	435

 

Note:If it is a single-phase capacitor,under the same voltage and the same capacity, the capacitor has no intermediatc terminal, its current is 1.732 times that of the three-phases, and the rest parameters are the same.
 

Part Parameter Table for 230-550V Three-phase, Single-phase 50Hz Parallel/Shunt Capacitor, Filter Capacitor
Um	230V	250V	400V	415V	440V	450V	460V	480V	500V	525V	550V	H
Cap. (Kvar)	6	7	10	10.5	9	9.5	10	10.5	7	7.5	8.5	114mm
	122	14	20	21	18	19	20	21	14	15	17	178mm
	15	15	25	25	25	25	25	25	20	20	20	242mm
	16	20		30				30
	18	21	30	32	27	28	30	32	21	23	25
	20	25	35	40	30	30	35	35	25	25	30	306mm
					35	35		40		30
	24	28	40	43	36	38	40	43	28	31	34
				45		40		45				370mm
	25	30	45	50	40	45	45	50	30	35	40
	30	35	50	54	45	47	50	54	35	39	42
					50	50			40	40	45	435mm
	35	40	55	60		55	55	60		45	50
	36	42	60	65	54	57	60	65	42	46	51
According to the voltage and capacity, you can get the dimension from above table.

Detailed Photos